· A The area of a measurement
· B The command used to create the measurement (for integration use)
· C The comment/note associated with a measurement
· D The current session name with full path
· F The filename of the drawing used for the measurement, with full path
· G The measurement category
· H The height of a volume measurement or height of a vertical area measurement
· I The unique internal measurement number (it never changes, even during renumbering)
· J Drawing ID (for internal diagnostic use)
· L The length of a measurement
· M The measurement number/reference
· N Number of items (i.e., the Count measurement)
· O The filename of the drawing used for the measurement, without the path
· P The perimeter of a measurement
· R The renamed title of a drawing (done in the Attached Drawings dialog box). For more information, see Amending the Drawing Name or Section Title.
· S Measurement Status Code (New, Revised, Deleted and so on)
· T The length/area/volume or count of the measurement (it's value)
· U The unit of measurement (for example, m,m2,m3, No)
· V The volume of a measurement
· Y Measurement Type Code (20=Area, 21=Length, 22=Volume, 23=Number, 24=Count, 25=Group)
· Z The measurement style name
- Blank Field
$$$text Fixed text – the characters following the $$$ prefix will be output
Note: Some of these key letters are measurement dependent, ie they are only output if the type of the measurement (length, area, volume or count) match the key letter. Otherwise a blank field is output.
NB: Users who wish to use the Viewer to provide a summary of their output, are advised to use the Printout format, as supplied with CADMeasure, i.e., M,N,L,-,A,V,H,C